Topcon RL-H4C is a good option for professionals who are in the general construction field, agricultural leveling & manual slope jobs. This device initial standard for all wide range construction leveling tasks. With the highest speed self-leveling, there I no leveling screws needed and there are no bubble vials too. All you need is to turn it on & in seconds you are working. It is so easy to set up and it also offers you a manual slop functioning, which will enable you to match the current single slopes up to 5 degrees, while the cross axis self-leveling offers you out of level security for the contradictory axis.
Precise, unchanging, dependability, this device is meant for long distance measurements across the whole site. The transmitter of this device can send a self leveled 360 degree laser reference continuously over the whole workplace, thus it will enable you to work longer from every set up with better precision. It is high powered at 2.4MW diode, which means that you will have around 2,600 diameter working sort to make it a good source of reference for receivers that are machine mounted.
This device was made to go through the toughest use. It is also meant for slop applications like excavating, pipe laying, septic systems, sloped pads & fields as well. It is also meant for embankments & drainage as well. As a regular laser, it can also be used to check grades, elevation settings, foundations, concrete forms & footings too. It is also housed in a waterproof case to make sure of its maximum productivity at all times and anywhere too. This device has a 5 year guarantee from defects and parts and this runs within 5 years time. This device is just what you might be looking for.
Features & advantages
Topcon RL-H4C is packed with all the features that users are looking for in a rotary level laser device such as it is simple yet built with a manual slope that matches the capacity of an automated cross axis self leveling device.
- It is robustly constructed with dual handles and IP66 waterproof housing
- It is also equipped with the new LS-80L long distance laser sensor (See the details on Amazon)
Comparing different brands of rotary slope lasers
With the widest option of construction lasers available nowadays, it I truly a hard task to shop around and decide on a model to buy. Making a research on different models is just the best thing to do to know which brand is specifically meant for a particular job. This review will try to explain and reveal some of the features of different products that will best fit into ones needs. Basically, a professional must determine the jobs he/she wished to accomplish using the rotary laser slope.
Some questions like do you wish to work indoors, outdoors or both? Do you want to install underground pipes, rails of chairs in the kitchen, posts for fences and construction site grading? These are just some of the questions that you need to ask yourself first before you look for a device. The products that will be compared are Bosch GRL-400HKC & Topcon RL-H4C.
The Bosch GRL-400HKC is a rotary level type with an auto leveling capacity of +/-5 degrees. Its range is up to 1300 feet, while the accuracy is 3/32 at 100 feet. Its rotation is around 350, 600, 1,200rpm. Its weight is around 5.3 pounds & its packed with 2 D -1.5V battery that will last up to 40 hours and it is covered by a 2 year warranty.
Topcon RL-H4C on the other hand is also a rotary type of level with a leveling, auto of +/-5 degrees and the range is around 2600 feet. Its accuracy is at +/-1/16 @ 100 feet. The rotation can be adjusted to 600 and its weight around 30 pounds, which is heavier than the Bosch. It’s battery is D-1.5V lasting up to 100 hrs, longer compared to Bosch models. When you buy the Topcon RL-H4C you will be covered by their 5 year warranty. This is quite expensive than Bosch GRL-400HCK, since some of the specs of the Topcon RL-H4C are higher though they both come with a complete package. Well, users can buy the Topcon RL-H4C for robust use.